Global Plastics Processing Machinery Market - ABC6 - Providence, RI and New Bedford, MA News, Weather

Global Plastics Processing Machinery Market

Information contained on this page is provided by an independent third-party content provider. WorldNow and this Station make no warranties or representations in connection therewith. If you have any questions or comments about this page please contact pressreleases@worldnow.com.

SOURCE Reportlinker

NEW YORK, July 9, 2014 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:

 

Global Plastics Processing Machinery Market

 

http://www.reportlinker.com/p092538/Global-Plastics-Processing-Machinery-Market.html

 

This report analyzes the worldwide markets for Plastics Processing Machinery in US$ Million by the following Product Segments: Injection Molding Machines, Blow Molding Machines, Extrusion Molding Machines, Thermoforming Machines, and Others. The report provides separate comprehensive analytics for the US, Canada, Japan, Europe, Asia-Pacific, Latin America, and Rest of World. Annual estimates and forecasts are provided for the period 2013 through 2020. Also, a seven-year historic analysis is provided for these markets. Market data and analytics are derived from primary and secondary research. Company profiles are primarily based on public domain information including company URLs. The report profiles 284 companies including many key and niche players such as -

 

Alpha Marathon Film Extrusion Technologies, Inc.

Aoki Technical Laboratory, Inc.

Arburg GmbH + Co. KG

BEKUM Maschinenfabriken GmbH

Berlyn Extruders, Inc.

 

 

 

I. INTRODUCTION, METHODOLOGY & PRODUCT DEFINITIONS

Study Reliability and Reporting Limitations I-1

Disclaimers I-2

Data Interpretation & Reporting Level I-2

Quantitative Techniques & Analytics I-2

Product Definitions and Scope of Study I-3

Injection Molding Machines I-3

Blow Molding Machines I-4

Extrusion Molding Machines I-4

Thermoforming Machines I-4

Other Plastics Processing Machines I-4

Reaction Injection Molding I-4

Compression Molding I-4

Transfer Molding I-4

Rotational Molding I-5

Structural Foam Molding I-5

 

 

II. EXECUTIVE SUMMARY

 

1. INDUSTRY OVERVIEW II-1

Prelude II-1

Table 1: Global Plastics Production Output in Million Tons

for the Years 2009 Through 2013 (includes corresponding

Graph/Chart) II-1

Recession in Retrospect & the Road Ahead II-2

Demand Picks up for Used Plastics Processing Machinery II-3

Quick Turnaround in Injection Molding Equipment Post Recession II-3

Outlook II-4

Improvement in Global GDP Performance Bodes Well for the Market II-4

Table 2: World Real GDP Growth by Region/Country: 2012-2015

(includes corresponding Graph/Chart) II-5

Steady Growth in Global PMI Benefits Market Growth II-6

Eurozone Pictures a Cautious, Yet Optimistic Outlook for

Plastic Processors II-6

Table 3: M-o-M Business Climate Indicator in the Eurozone

Area for the Year 2013 & 2014 II-7

US - Improvement in Economy Augurs Well for PPM Market II-7

Developing Economies to Bolster Growth II-8

Injection Molding Corner's Lion's Share of Sales, and Blazes

Ahead II-8

Competitive Scenario II-9

Market Leaders II-9

Table 4: Global Market for Plastics Processing Machinery by

Leading Players (2013): Percentage Breakdown of Sales Value

for Engel, Haitian, Husky, Japan Steel, KraussMaffei,

Sumitomo, and Others (includes corresponding Graph/Chart) II-9

Select Leading Players in the Worldwide Plastics Processing

Machinery Market by Segment II-10

 

2. MARKET TRENDS AND ISSUES II-11

Scales of Global PPM Production Tilt Eastward II-11

Table 5: Global Rubber & Plastic Machinery Production by

Country (2007 & 2011): Percentage Breakdown of Production

Value for China, Germany, Italy, Japan, The United States,

and Others (includes corresponding Graph/Chart) II-11

China Turns into a Powerhouse for Plastic Processing Activity II-12

Table 6: Worldwide Plastic Injection Molding Machines

Production by Geographic Region/Country (2013): Percentage

Breakdown of Unit Volume Output for China, Europe, Japan,

North America, South Korea, and Rest of World (includes

corresponding Graph/Chart) II-12

US Injection Molding Market to Gain from Reshoring of Plastic

Production II-13

Micro Injection Molding Machines in Demand II-13

Table 7: Global Market for Thermoplastic Micro Injection

Molding by End-use Industry (2013): Percentage Breakdown of

Sales Revenues for Automotive, Healthcare & Medical, Micro

Controls & Drive Systems, Telecommunications, and Others

(includes corresponding Graph/Chart) II-14

Technology Enhancements Drive Market Growth II-14

Trend Towards Automation and Robotics II-15

Extruders Feature Advanced Capabilities II-15

New Thermo-formers Offer Higher Productivity Levels II-16

 

3. END-USE MARKET PERSPECTIVE II-17

Packaging Dominates End-use Market II-17

Table 8: Global Demand for Plastic Processing Machinery by

End-use Sector (2013): Percentage Breakdown of Demand Value

for Construction, Consumer & Institutional, Packaging, and

Others (includes corresponding Graph/Chart) II-17

Resurgent Demand for Packaging- A Major Growth Driver for

Plastic Processing Machinery II-18

Plastic Products Gain Traction in Building and Construction

Market II-19

Enhanced Usage of Plastics in Automobile Sector II-20

Table 9: World Passenger Car Production by Geographic

Region/Country (2010-2018) (in '000 Units) (includes

corresponding Graph/Chart) II-21

Medical and Healthcare Plastics Sector- A High Potential Market II-22

Rising Use of Plastic in Consumer Electronics Industry II-22

Booming Smartphone Sales Spur Demand for Precision Plastic

Injection Molding Technologies II-23

 

4. PRODUCT OVERVIEW II-24

Definition - Plastics Processing Machines II-24

Types of Plastics Processing Machinery II-24

Injection Molding Machines II-24

An Overview II-24

Blow Molding Machines II-24

Extrusion Molding Machines II-25

Thermoforming Molding Machines II-25

Other Plastics Processing Machines II-25

Reaction Injection Molding II-25

Compression Molding II-25

Transfer Molding II-26

Rotational Molding II-26

Structural Foam Molding II-26

 

5. PRODUCT INNOVATIONS/INTRODUCTIONS II-27

AiBiM Plastics Machinery Upgrades Blow Molding Equipment Range II-27

BWE Introduces Conklad™ 315 Equipment II-27

Dave Technical Services to Introduce New Range of DI 100 Mini

Blow Molding Equipment II-27

Ferromatik Milacron to Launch New F-Series of Molding Equipment II-28

Milacron to Launch New Series of Small ELEKTRON Equipment II-28

Prasad Wemo Robot System Introduces Servo Robot for Injection

Molding Equipment II-28

Husky Injection Molding Systems Unveils HyPET HPP5 Preform

Molding Equipment II-29

Serac Introduces Serac Blow Linear PET Bottle Molding

Equipment for Dairy Products II-29

Kautex Maschinenbau to Introduce Range of KBB Extrusion Blow

Molding Devices II-29

Smart Machinery & Moulds Unveils Compact Extrusion Blow

Molding Equipment II-29

SIPA Introduces Range of SFR EVO3 Stretch-Blow Molding Equipment II-30

Zhafir Launches Mercury Injection Molding Machine II-30

Premier Material Concepts Introduces Thermoforming Line II-30

Multivac to Introduce Thermoforming Pharmaceuticals Packaging

Machine II-31

ULMA Packaging Launches Skin Packaging TFS Thermoformers II-31

Bosch Packaging Technology Launches Thermoforming Clean-Fill

Machine II-32

Multivac to Introduces Thermoforming Packaging Machine R515 II-32

Jomar Unveils Model 20 Injection Blow Molding Machine II-32

Krones Launches New Contiform Series of PET Stretch Blow

Molding Machines II-33

Currier Plastics Unveils Three New Blow Molding Machines II-34

MEGA Machinery Mould to Unveil Two Blow Molding Machines and

PET Preform Mold II-34

Jomar Develops CR Range of Injection Blow Molding II-35

Jomar Unveils 160 Ton Model of Injection Molding Machine II-35

Fanuc Launches Roboshot Series Injection Molding Machines II-35

Engel Launches e-Mac Automated Injection Molding Machines II-36

Milacron Launches Roboshot Range of Automated Injection

Molding Machines II-36

KraussMaffei Launches GX Series Injection Molding Machines II-37

Sanyu Launches STI-4.0-400VS Injection Molding Machine II-38

Haitian International to Introduce New Generations of

Injection Moulding Machines II-38

iPlast Launches Novel Injection Molding Machine II-39

KraussMaffei Technologies to Introduce Standard Hydraulic and

Electric Injection Molding Machines II-39

TH Plastics Introduces Injection Moulding Machines from Japan

Steel Works II-40

Cantoni and Engel Holding Develop inject2blow Process II-40

Multivac Unveils a Novel Thermoforming Machine R 515 II-41

 

6. PRODUCT INNOVATIONS/INTRODUCTIONS IN RECENT PAST - A

PERSPECTIVE BUILDER II-42

Sovrin Plastics Introduces Fanuc Roboshot 2000i-300B-350T II-42

Zhejiang ZIQIANG Machinery Unveils ZQ-M600-4, ZQ-B600-8 Blow

Molding Machines II-42

Jiangsu Victor Machinery Unveils Fully-automatic Rotary

Stretch Blow Molding Machine II-42

Akei Holdings Launches AE-70-TS All-electric Blow Molding Machine II-42

Multivac Launches R 595 Bacon Packaging System II-43

VC999 Packaging Systems to Launch i Series Thermoformer II-43

Multivac Rolls Out R 105 Thermoforming Packaging Machine II-43

Multivac Introduces R 095 Thermoform Packaging Machine II-44

Maryland Thermoform Introduces MAAC Comet 64DE Shuttle Cut

Sheet Thermoformer II-44

Pinnpack Unveils New Thermoforming Machine II-44

Krones Launches New Contiform 3 Series of Stretch Blow Molding

Machines II-44

Kautex Maschinenbau Unveils KCC15D Medium-Scale Blow Molding

Machine II-44

Arburg to Unveil New Injection Molding Machines II-45

Kraussmaffei Introduces New Injection Molding Model II-45

GN Thermoforming Launches the New Plug-assist Thermoformer II-46

Krones Unveils the New Blow Molding Machine Series II-46

Sumitomo Heavy Industries Launches the Novel Series of Plastic

Injection Molding Machines II-46

Maschinenbau Launches Kautex KCC15D Blow Molding Machine II-47

ARBURG Unveils Allrounder Edrive Series of Injection Molding

Machines II-47

Victor Unveils Victor V-alpha II 200, an All-Electric

Injection Molding Machine II-48

Multivac to Launch R 095 Thermoformer II-48

SERAC to Launch Roll N Blow Thermoformer II-49

 

7. RECENT INDUSTRY ACTIVITY II-50

ContiTech Takes Over Präzisionstechnik Geithain and Innovative

Technologie II-50

Milacron Takes Over Industrial Machine and Precise Plastics II-50

Milacron LLC Takes Over Mold-Masters II-50

Graham Engineering Corporation Acquires Welex II-50

iMflux to Establish New Manufacturing Facility in Ohio II-51

Graham Engineering Corporation Acquires Majority Stake in

American Kuhne II-51

Flambeau Takes Over Partners in Plastics II-51

CCMP Acquires Milacron II-51

CW Thomas Acquires Analytic Plastics II-51

Engel Enters into JV with Plastisud II-52

SMC to Extend Kanchanaburi-Based Facility II-52

Ramko Establishes Injection Molding Facility II-52

Advanced Molding Technologies to Expand its Minneapolis Factory II-53

Sumitomo Extends Product Line and Sales Network II-53

Sonoco Extends Blow Molding and Thermoforming Capacity II-53

Dynisco Acquires Hao-Ying II-53

Krauss Maffei Bags Order from Azenco II-54

Plastisud and Engel Austria Set Up a Joint Venture for the

Chinese Market II-54

L&T to Divest Processing Machinery Business Division to

Toshiba Machine II-54

 

8. FOCUS ON SELECT GLOBAL PLAYERS II-55

Alpha Marathon Film Extrusion Technologies, Inc. (Canada) II-55

Aoki Technical Laboratory, Inc. (Japan) II-55

Arburg GmbH + Co. KG (Germany) II-55

BEKUM Maschinenfabriken GmbH (Germany) II-56

Berlyn Extruders, Inc. (US) II-56

Brampton Engineering, Inc. (Canada) II-56

Brown Machine LLC (US) II-57

Brückner Group GmbH (Germany) II-57

CROWN Machine uwp, Inc. (US) II-58

Davis-Standard, LLC (US) II-58

Donghua Machinery Ltd. (China) II-58

FANUC Corporation (Japan) II-59

Fu Chun Shin Machinery Manufacture Co., Ltd. (Taiwan) II-59

G.N. Plastics Company Limited (Canada) II-60

Graham Engineering Corporation (US) II-60

Haitian International Holdings Limited (China) II-60

Husky Injection Molding Systems Ltd. (Canada) II-60

Intype Enterprise Co., Ltd. (Taiwan) II-61

Kautex Maschinenbau GmbH (Germany) II-61

KraussMaffei Technologies GmbH (Germany) II-61

Lyle Industries, Inc. (US) II-62

Macro Engineering & Technology, Inc. (Canada) II-62

Milacron LLC (US) II-62

Nan Rong Mechanical Co., Ltd. (Taiwan) II-63

NEGRI BOSSI SpA (Italy) II-63

Ningbo Haida Plastic Machinery Co., Ltd. (China) II-63

Nissei ASB Machine Co., Ltd. (Japan) II-63

Queen's Machinery Co., Ltd. (Taiwan) II-64

SencorpWhite, Inc. (US) II-64

Sidel (Switzerland) II-64

Sumitomo Heavy Industries Ltd. (Japan) II-65

Sumitomo (SHI) Demag Plastics Machinery GmbH (Germany) II-65

Sunningdale Tech Ltd. (Singapore) II-66

Thai Hydraulic Machinery (1987) Co., Ltd. (Thailand) II-66

Toshiba Machine Co., Ltd. (Japan) II-66

 

9. GLOBAL MARKET PERSPECTIVE II-67

Table 10: World Recent Past, Current & Future Analysis for

Plastics Processing Machinery by Geographic Region - US,

Canada, Japan, Europe, Asia-Pacific (excluding Japan), Latin

America and Rest of World Markets Independently Analyzed with

Annual Sales Figures in US$ Million for Years 2013 through

2020 (includes corresponding Graph/Chart) II-67

 

Table 11: World Historic Review for Plastics Processing

Machinery by Geographic Region - US, Canada, Japan, Europe,

Asia-Pacific (excluding Japan), Latin America and Rest of

World Markets Independently Analyzed with Annual Sales Figures

in US$ Million for Years 2006 through 2012 (includes

corresponding Graph/Chart) II-68

 

Table 12: World 15-Year Perspective for Plastics Processing

Machinery by Geographic Region - Percentage Breakdown of

Dollar Sales for US, Canada, Japan, Europe, Asia-Pacific

(excluding Japan), Latin America and Rest of World Markets for

Years 2006, 2014, and 2020 (includes corresponding

Graph/Chart) II-69

 

Table 13: World Recent Past, Current & Future Analysis for

Injection Molding Machines by Geographic Region - US, Canada,

Japan, Europe, Asia-Pacific (excluding Japan), Latin America

and Rest of World Markets Independently Analyzed with Annual

Sales Figures in US$ Million for Years 2013 through 2020

(includes corresponding Graph/Chart) II-70

 

Table 14: World Historic Review for Injection Molding Machines

by Geographic Region - US, Canada, Japan, Europe, Asia-Pacific

(excluding Japan), Latin America and Rest of World Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) II-71

 

Table 15: World 15-Year Perspective for Injection Molding

Machines by Geographic Region - Percentage Breakdown of Dollar

Sales for US, Canada, Japan, Europe, Asia-Pacific (excluding

Japan), Latin America and Rest of World Markets for Years

2006, 2014, and 2020 (includes corresponding Graph/Chart) II-72

 

Table 16: World Recent Past, Current & Future Analysis for

Blow Molding Machines by Geographic Region - US, Canada,

Japan, Europe, Asia-Pacific (excluding Japan), Latin America

and Rest of World Markets Independently Analyzed with Annual

Sales Figures in US$ Million for Years 2013 through 2020

(includes corresponding Graph/Chart) II-73

 

Table 17: World Historic Review for Blow Molding Machines by

Geographic Region - US, Canada, Japan, Europe, Asia-Pacific

(excluding Japan), Latin America and Rest of World Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) II-74

 

Table 18: World 15-Year Perspective for Blow Molding Machines

by Geographic Region - Percentage Breakdown of Dollar Sales

for US, Canada, Japan, Europe, Asia-Pacific (excluding Japan),

Latin America and Rest of World Markets for Years 2006, 2014,

and 2020 (includes corresponding Graph/Chart) II-75

 

Table 19: World Recent Past, Current & Future Analysis for

Extrusion Molding Machines by Geographic Region - US, Canada,

Japan, Europe, Asia-Pacific (excluding Japan), Latin America

and Rest of World Markets Independently Analyzed with Annual

Sales Figures in US$ Million for Years 2013 through 2020

(includes corresponding Graph/Chart) II-76

 

Table 20: World Historic Review for Extrusion Molding Machines

by Geographic Region - US, Canada, Japan, Europe, Asia-Pacific

(excluding Japan), Latin America and Rest of World Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) II-77

 

Table 21: World 15-Year Perspective for Extrusion Molding

Machines by Geographic Region - Percentage Breakdown of Dollar

Sales for US, Canada, Japan, Europe, Asia-Pacific (excluding

Japan), Latin America and Rest of World Markets for Years

2006, 2014, and 2020 (includes corresponding Graph/Chart) II-78

 

Table 22: World Recent Past, Current & Future Analysis for

Thermoforming Molding Machines by Geographic Region - US,

Canada, Japan, Europe, Asia-Pacific (excluding Japan), Latin

America and Rest of World Markets Independently Analyzed with

Annual Sales Figures in US$ Million for Years 2013 through

2020 (includes corresponding Graph/Chart) II-79

 

Table 23: World Historic Review for Thermoforming Molding

Machines by Geographic Region - US, Canada, Japan, Europe,

Asia-Pacific (excluding Japan), Latin America and Rest of

World Markets Independently Analyzed with Annual Sales Figures

in US$ Million for Years 2006 through 2012 (includes

corresponding Graph/Chart) II-80

 

Table 24: World 15-Year Perspective for Thermoforming Molding

Machines by Geographic Region - Percentage Breakdown of Dollar

Sales for US, Canada, Japan, Europe, Asia-Pacific (excluding

Japan), Latin America and Rest of World Markets for Years

2006, 2014, and 2020 (includes corresponding Graph/Chart) II-81

 

Table 25: World Recent Past, Current & Future Analysis for

Other Plastics Processing Machinery by Geographic Region - US,

Canada, Japan, Europe, Asia-Pacific (excluding Japan), Latin

America and Rest of World Markets Independently Analyzed with

Annual Sales Figures in US$ Million for Years 2013 through

2020 (includes corresponding Graph/Chart) II-82

 

Table 26: World Historic Review for Other Plastics Processing

Machinery by Geographic Region - US, Canada, Japan, Europe,

Asia-Pacific (excluding Japan), Latin America and Rest of

World Markets Independently Analyzed with Annual Sales Figures

in US$ Million for Years 2006 through 2012 (includes

corresponding Graph/Chart) II-83

 

Table 27: World 15-Year Perspective for Other Plastics

Processing Machinery by Geographic Region - Percentage

Breakdown of Dollar Sales for US, Canada, Japan, Europe,

Asia-Pacific (excluding Japan), Latin America and Rest of

World Markets for Years 2006, 2014, and 2020 (includes

corresponding Graph/Chart) II-84

 

 

III. MARKET

 

1. THE UNITED STATES III-1

A.Market Analysis III-1

Outlook III-1

Slow, Steady Recovery from Doldrums III-1

Table 28: The US Overall Spending on Plastic Processing

Equipment, Molds, and Associated Supplies, and Solutions

(2013E & 2014E): Percentage Breakdown of Value Expenditure

by End-use Sector (includes corresponding Graph/Chart) III-3

Reshoring of Plastic Production Spells Good Fortunes for

Injection Molding Market III-4

Shale Gas Abundance Improves Competitive Edge of US Plastic

Processors III-4

Domestic & Export Demand for Locally Manufactured PPM on the

Rise III-4

Favorable Growth Prospects for Nascent Blow Molding

Machinery Market III-4

All-Electric Blow Molding Machinery Market Remains Nascent III-5

Demand for Used Plastic Injection Molding Machinery Stabilizes III-5

Packaging Industry - Leading End-Use Market III-5

Table 29: Plastics Processing Machinery Market in the US

(2013): Percentage Breakdown by End-Use Segment -

Packaging, Automotive, Consumer Electronics, and Others

(includes corresponding Graph/Chart) III-6

 

Table 30: Injection Molding Machinery Market in the US

(2013): Percentage Breakdown of Sales by End-Use Segment -

Packaging, Automotive, Consumer, and Others (includes

corresponding Graph/Chart) III-6

 

Table 31: Blow Molding Machinery Market in the US (2013):

Percentage Breakdown of Sales by End-Use Segment -

Packaging, Automotive, Consumer, and Others (includes

corresponding Graph/Chart) III-6

Trade Statistics III-7

Table 32: The US Exports of Rubber & Plastics Injection

Molding Machinery by Destination Country (2012 & 2013):

Percentage Breakdown of Value Exports for Mexico, Canada,

China, Russia, Singapore, Thailand, the United Kingdom,

Malaysia, Germany, Venezuela, Others (includes

corresponding Graph/Chart) III-7

 

Table 33: The US Imports of Rubber & Plastics Injection

Molding Machinery by Source Country (2012 & 2013):

Percentage Breakdown of Value Imports for Japan, Germany,

Austria, Canada, China, Italy, India, Taiwan, Switzerland,

South Korea, and Others (includes corresponding

Graph/Chart) III-8

 

Table 34: The US Exports of Rubber & Plastics Blow Molding

Machines by Destination Countries (2012 & 2013): Percentage

Breakdown of Value Exports for Mexico, Australia, Saudi

Arabia, Canada, Germany, Ecuador, Venezuela, Indonesia,

United Kingdom, Panama, and Others (includes corresponding

Graph/Chart) III-9

 

Table 35: The US Imports of Rubber & Plastics Blow Molding

Machines by Source Country (2012 & 2013): Percentage

Breakdown of Value Imports for Germany, Japan, Switzerland,

France, Italy, Canada, China, Taiwan, Poland, Austria, and

Others (includes corresponding Graph/Chart) III-10

 

Table 36: The US Exports of Rubber & Plastics Extrusion

Machinery by Destination Country (2012 & 2013): Percentage

Breakdown of Value Exports for Mexico, China, Canada,

Brazil, India, Russia, the United Kingdom, South Korea,

Germany, Indonesia, and Others (includes corresponding

Graph/Chart) III-11

 

Table 37: The US Imports of Rubber & Plastics Extrusion

Machinery by Source Country (2012 & 2013): Percentage

Breakdown of Value Imports for Germany, Italy, Switzerland,

Japan, Austria, Taiwan, China, France, the Netherlands,

Brazil, and Others (includes corresponding Graph/Chart) III-12

 

Table 38: The US Exports of Rubber & Plastics Vacuum

Molding and Other Thermoforming Machinery by Destination

Country (2012 & 2013): Percentage Breakdown of Value

Exports for Mexico, Canada, China, Russia, Singapore,

Thailand, The United Kingdom, Malaysia, Germany, Venezuela,

and Others (includes corresponding Graph/Chart) III-13

 

Table 39: The US Imports of Rubber & Plastics Vacuum

Molding and Other Thermoforming Machinery by Source Country

(2012 & 2013): Percentage Breakdown of Value Imports for

Germany, Canada, Italy, Taiwan, Hungary, Austria, the

United Kingdom, Costa Rica, Japan, China, Others (includes

corresponding Graph/Chart) III-14

Product Introductions III-15

Recent Industry Activity III-18

Select Key Players III-21

B.Market Analytics III-25

Table 40: US Recent Past, Current & Future Analysis for

Plastics Processing Machinery by Product Segment - Injection

Molding Machines, Blow Molding Machines, Extrusion Machines,

Thermoforming Machines, and Other Plastics Processing

Machines Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-25

 

Table 41: US Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-26

 

Table 42: US 15-Year Perspective for Plastics Processing

Machinery by Product Segment - Percentage Breakdown of

Dollar Sales for Injection Molding Machines, Blow Molding

Machines, Extrusion Machines, Thermoforming Machines, and

Other Plastics Processing Machines Markets for Years 2006,

2014, and 2020 (includes corresponding Graph/Chart) III-27

 

2. CANADA III-28

A.Market Analysis III-28

Current and Future Scenario III-28

Superiority in Specific Niche Technologies III-28

Trade Statistics III-29

Table 43: Canadian Exports of Rubber & Plastic Injection

Molding Machinery by Destination Country (2012 & 2013):

Percentage Breakdown of Value Exports for the United

States, Luxembourg, Brazil, Mexico, Japan, Indonesia, Saudi

Arabia, India, Argentina, Algeria, and Others (includes

corresponding Graph/Chart) III-29

 

Table 44: Canadian Imports of Rubber & Plastic Injection

Molding Machinery by Source Country (2012 & 2013):

Percentage Breakdown of Value Imports for Germany, Japan,

Austria, China, the United States, Switzerland, Taiwan,

Italy, Poland, Re-Imports, and Others (includes

corresponding Graph/Chart) III-30

 

Table 45: Canadian Exports of Rubber & Plastic Blow Molding

Machinery by Destination Country (2012 & 2013): Percentage

Breakdown of Value Exports for the United States, Brazil,

Italy, Spain, Algeria, Trinidad & Tobago, Sweden, Mexico,

Peru, Guatemala, and Others (includes corresponding

Graph/Chart) III-31

 

Table 46: Canadian Imports of Rubber & Plastic Blow Molding

Machinery by Source Country (2012 & 2013): Percentage

Breakdown of Value Imports for Italy, The United States,

Taiwan, China, Germany, Japan, Lithuania, Spain, Poland,

France, and Others (includes corresponding Graph/Chart) III-32

 

Table 47: Canadian Exports of Rubber & Plastic Extrusion

Machinery by Destination Country (2012 & 2013): Percentage

Breakdown of Value Exports for the United States, Brazil,

the United Kingdom, France, Japan, Spain, Malaysia, Mexico,

China, Costa Rica, and Others (includes corresponding

Graph/Chart) III-33

 

Table 48: Canadian Imports of Rubber & Plastic Extrusion

Machinery by Source Country (2012 & 2013): Percentage

Breakdown of Value Imports for the United States, Germany,

The Netherlands, Italy, Austria, China, Brazil, Finland,

Japan, the United Kingdom, and Others (includes

corresponding Graph/Chart) III-34

 

Table 49: Canadian Exports of Rubber & Plastic Vacuum

Molding and Other Thermoforming Machinery by Destination

Country (2012 & 2013): Percentage Breakdown of Value

Exports for the United States, the United Kingdom, Mexico,

Germany, Russia, Czech Republic, Chile, Romania, Australia,

Algeria, and Others (includes corresponding Graph/Chart) III-35

 

Table 50: Canadian Imports of Rubber & Plastic Vacuum

Molding and Other Thermoforming Machinery by Source Country

(2012 & 2013): Percentage Breakdown of Value Imports for

the United States, Germany, Japan, Austria, Italy , China,

Taiwan, France, India, Re-Imports, Others (includes

corresponding Graph/Chart) III-36

Product Introduction III-36

Select Key Players III-37

B.Market Analytics III-39

Table 51: Canadian Recent Past, Current & Future Analysis

for Plastics Processing Machinery by Product Segment -

Injection Molding Machines, Blow Molding Machines, Extrusion

Machines, Thermoforming Machines, and Other Plastics

Processing Machines Markets Independently Analyzed with

Annual Sales Figures in US$ Million for Years 2013 through

2020 (includes corresponding Graph/Chart) III-39

 

Table 52: Canadian Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-40

 

Table 53: Canadian 15-Year Perspective for Plastics

Processing Machinery by Product Segment - Percentage

Breakdown of Dollar Sales for Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets for

Years 2006, 2014, and 2020 (includes corresponding

Graph/Chart) III-41

 

3. JAPAN III-42

A.Market Analysis III-42

Outlook III-42

Recent Past Perspective III-42

Competition III-43

Table 54: Leading Manufacturers of Injection Molding

Machinery in Japan (2013): Percentage Breakdown of Value

Sales for FANUC Corporation, Japan Steel Works, Nissei

Plastic, Sumitomo Heavy Industries, Toshiba Kikai, and

Others (includes corresponding Graph/Chart) III-43

Trade Statistics III-44

Table 55: Japanese Exports of Plastic Processing Machinery

by Equipment Type (2011 & 2012): Percentage Breakdown of

Export Volumes for Injection Molding Machinery, Extruders,

and Blow Molding Machinery (includes corresponding

Graph/Chart) III-44

 

Table 56: Japanese Exports of Plastic Processing Machinery

by Equipment Type (2011 & 2012): Percentage Breakdown of

Export Value for Injection Molding Machinery, Extruders,

and Blow Molding Machinery (includes corresponding

Graph/Chart) III-44

 

Table 57: Japanese Imports of Plastic Processing Machinery

by Equipment Type (2011 & 2012): Percentage Breakdown of

Import Volumes for Injection Molding Machinery, Extruders,

and Blow Molding Machinery (includes corresponding

Graph/Chart) III-45

 

Table 58: Japanese Imports of Plastic Processing Machinery

by Equipment Type (2011 & 2012): Percentage Breakdown of

Import Value for Extruders Blow Molding Machinery, and

Injection Molding Machinery (includes corresponding

Graph/Chart) III-45

Select Key Players III-46

B.Market Analytics III-49

Table 59: Japanese Recent Past, Current & Future Analysis

for Plastics Processing Machinery by Product Segment -

Injection Molding Machines, Blow Molding Machines, Extrusion

Machines, Thermoforming Machines, and Other Plastics

Processing Machines Markets Independently Analyzed with

Annual Sales Figures in US$ Million for Years 2013 through

2020 (includes corresponding Graph/Chart) III-49

 

Table 60: Japanese Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-50

 

Table 61: Japanese 15-Year Perspective for Plastics

Processing Machinery by Product Segment - Percentage

Breakdown of Dollar Sales for Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets for

Years 2006, 2014, and 2020 (includes corresponding

Graph/Chart) III-51

 

4. EUROPE III-52

A.Market Analysis III-52

Outlook III-52

Plastics Market Weighed Down by Challenges III-52

Soaring Raw Material Prices - Yet another Concern III-53

Extrusion Machine Market in Europe III-53

Future Growth to Emerge from Packaging Applications III-53

Central and Eastern European Countries Hold Immense

Potential for Growth III-53

Impact of Recession III-54

B.Market Analytics III-55

Table 62: European Recent Past, Current & Future Analysis

for Plastics Processing Machinery by Geographic Region -

France, Germany, Italy, UK, Spain, Russia and Rest of Europe

Markets Independently Analyzed with Annual Sales Figures in

US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-55

 

Table 63: European Historic Review for Plastics Processing

Machinery by Geographic Region - France, Germany, Italy, UK,

Spain, Russia and Rest of Europe Markets Independently

Analyzed with Annual Sales Figures in US$ Million for Years

2006 through 2012 (includes corresponding Graph/Chart) III-56

 

Table 64: European 15-Year Perspective for Plastics

Processing Machinery by Geographic Region - Percentage

Breakdown of Dollar Sales for France, Germany, Italy, UK,

Spain, Russia and Rest of Europe Markets for Years 2006,

2014, and 2020 (includes corresponding Graph/Chart) III-57

 

Table 65: European Recent Past, Current & Future Analysis

for Plastics Processing Machinery by Product Segment -

Injection Molding Machines, Blow Molding Machines, Extrusion

Machines, Thermoforming Machines, and Other Plastics

Processing Machines Markets Independently Analyzed with

Annual Sales Figures in US$ Million for Years 2013 through

2020 (includes corresponding Graph/Chart) III-58

 

Table 66: European Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-59

 

Table 67: European 15-Year Perspective for Plastics

Processing Machinery by Product Segment - Percentage

Breakdown of Dollar Sales for Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets for

Years 2006, 2014, and 2020 (includes corresponding

Graph/Chart) III-60

 

4a. FRANCE III-61

A.Market Analysis III-61

Market Overview III-61

B.Market Analytics III-62

Table 68: French Recent Past, Current & Future Analysis for

Plastics Processing Machinery by Product Segment - Injection

Molding Machines, Blow Molding Machines, Extrusion Machines,

Thermoforming Machines, and Other Plastics Processing

Machines Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-62

 

Table 69: French Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-63

 

Table 70: French 15-Year Perspective for Plastics Processing

Machinery by Product Segment - Percentage Breakdown of

Dollar Sales for Injection Molding Machines, Blow Molding

Machines, Extrusion Machines, Thermoforming Machines, and

Other Plastics Processing Machines Markets for Years 2006,

2014, and 2020 (includes corresponding Graph/Chart) III-64

 

4b. GERMANY III-65

A.Market Analysis III-65

Market Overview III-65

Product Introductions III-65

Strategic Corporate Development III-72

Select Key Players III-73

B.Market Analytics III-76

Table 71: German Recent Past, Current & Future Analysis for

Plastics Processing Machinery by Product Segment - Injection

Molding Machines, Blow Molding Machines, Extrusion Machines,

Thermoforming Machines, and Other Plastics Processing

Machines Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-76

 

Table 72: German Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-77

 

Table 73: German 15-Year Perspective for Plastics Processing

Machinery by Product Segment - Percentage Breakdown of

Dollar Sales for Injection Molding Machines, Blow Molding

Machines, Extrusion Machines, Thermoforming Machines, and

Other Plastics Processing Machines Markets for Years 2006,

2014, and 2020 (includes corresponding Graph/Chart) III-78

 

4c. ITALY III-79

A.Market Analysis III-79

Market Overview III-79

Buoyed by Strong Export Demand III-79

Table 74: Italian Imports of Plastics & Rubber Machinery,

Equipment and Moulds by Equipment Type (Jan-June 2012 &

Jan-June 2013 ): Percentage Breakdown of Import Value for

Injection Molding Machines, Flexographic Printers,

Extruders & Extruder Lines, Various Presses, Blow Molding

Machines, Thermoforming Machines, Other Machines, Parts &

Components, and Molds (includes corresponding Graph/Chart) III-80

 

Table 75: Italian Exports of Plastics & Rubber Machinery,

Equipment and Moulds by Equipment Type (2012): Percentage

Breakdown of Export Value for Extruders & Extruder Lines,

Blow Molding Machines, Injection Molding Machines,

Flexographic Printers, Various Presses, Thermoforming

Machines, Other Machines, Parts & Components, and Molds

(includes corresponding Graph/Chart) III-81

 

Table 76: Italian Exports of Plastics & Rubber Machinery,

Equipment and Molds by Geographic Region (2011, 2012 &

2013): Percentage Breakdown of Export Value for Europe,

Asia-Pacific, North America, Latin America, and Africa

Markets (includes corresponding Graph/Chart) III-82

 

Table 77: Italian Exports of Plastics & Rubber Machinery,

Equipment and Moulds by Country (2012): Percentage

Breakdown of Export Value for Germany, France, the United

States, China, Russia, and Others (includes corresponding

Graph/Chart) III-82

 

Table 78: Italian Exports of Plastics & Rubber Machinery,

Equipment and Moulds by Country (2012): Percentage

Breakdown of Export Value for Germany, France, the United

States, Poland, China, and Others (includes corresponding

Graph/Chart) III-83

Product Introductions III-83

Negri Bossi Spa- A Key Italian Player III-84

B.Market Analytics III-85

Table 79: Italian Recent Past, Current & Future Analysis for

Plastics Processing Machinery by Product Segment - Injection

Molding Machines, Blow Molding Machines, Extrusion Machines,

Thermoforming Machines, and Other Plastics Processing

Machines Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-85

 

Table 80: Italian Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-86

 

Table 81: Italian 15-Year Perspective for Plastics

Processing Machinery by Product Segment - Percentage

Breakdown of Dollar Sales for Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets for

Years 2006, 2014, and 2020 (includes corresponding

Graph/Chart) III-87

 

4d. THE UNITED KINGDOM III-88

A.Market Analysis III-88

Outlook III-88

Market Overview III-88

UK- An Innovation-Driven Plastic Machinery Industry III-88

Table 82: The UK Plastic Demand by End-use Sector (2013):

Percentage Breakdown of Consumption Volume for Packaging,

Construction Products, Electrical, Household Electronics,

Transport, Medical, and Others (includes corresponding

Graph/Chart) III-89

Product Introductions III-89

Krauss-Maffei Uk Ltd - A Uk Key Player III-89

B.Market Analytics III-90

Table 83: UK Recent Past, Current & Future Analysis for

Plastics Processing Machinery by Product Segment - Injection

Molding Machines, Blow Molding Machines, Extrusion Machines,

Thermoforming Machines, and Other Plastics Processing

Machines Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-90

 

Table 84: UK Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-91

 

Table 85: UK 15-Year Perspective for Plastics Processing

Machinery by Product Segment - Percentage Breakdown of

Dollar Sales for Injection Molding Machines, Blow Molding

Machines, Extrusion Machines, Thermoforming Machines, and

Other Plastics Processing Machines Markets for Years 2006,

2014, and 2020 (includes corresponding Graph/Chart) III-92

 

4e. SPAIN III-93

A.Market Analysis III-93

Product Introduction III-93

B.Market Analytics III-94

Table 86: Spanish Recent Past, Current & Future Analysis for

Plastics Processing Machinery by Product Segment - Injection

Molding Machines, Blow Molding Machines, Extrusion Machines,

Thermoforming Machines, and Other Plastics Processing

Machines Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-94

 

Table 87: Spanish Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-95

 

Table 88: Spanish 15-Year Perspective for Plastics

Processing Machinery by Product Segment - Percentage

Breakdown of Dollar Sales for Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets for

Years 2006, 2014, and 2020 (includes corresponding

Graph/Chart) III-96

 

4f. RUSSIA III-97

A.Market Analysis III-97

Outlook III-97

Market Overview III-97

Product Introduction III-97

B.Market Analytics III-98

Table 89: Russian Recent Past, Current & Future Analysis for

Plastics Processing Machinery by Product Segment - Injection

Molding Machines, Blow Molding Machines, Extrusion Machines,

Thermoforming Machines, and Other Plastics Processing

Machines Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-98

 

Table 90: Russian Historic Review for Plastics Processing

Machinery by Product Segment - Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) III-99

 

Table 91: Russian 15-Year Perspective for Plastics

Processing Machinery by Product Segment - Percentage

Breakdown of Dollar Sales for Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets for

Years 2006, 2014, and 2020 (includes corresponding

Graph/Chart) III-100

 

4g. REST OF EUROPE III-101

A.Market Analysis III-101

Outlook III-101

Overview of Poland Market III-101

Table 92: Poland Plastics Consumption by End-Use Sector

(2013): Percentage Breakdown of Consumption Volume for

Packaging, Construction, Consumer Electronics, Automotive

Components, and Others (includes corresponding

Graph/Chart) III-101

Turkey PPM Producers Dominate Middle East and African Market III-102

Table 93: Turkey Plastic Processor Market by End-use

Sector (2013): Percentage Breakdown of Value Sales of

Plastic Materials for Packaging, Construction Products,

Electrical & Electronics, Agriculture, Automotive,

Textiles, and Others (includes corresponding Graph/Chart) III-102

Product Introductions III-103

Sidel s.a. - a key player III-103

B.Market Analytics III-104

Table 94: Rest of Europe Recent Past, Current & Future

Analysis for Plastics Processing Machinery by Product

Segment - Injection Molding Machines, Blow Molding Machines,

Extrusion Machines, Thermoforming Machines, and Other

Plastics Processing Machines Markets Independently Analyzed

with Annual Sales Figures in US$ Million for Years 2013

through 2020 (includes corresponding Graph/Chart) III-104

 

Table 95: Rest of Europe Historic Review for Plastics

Processing Machinery by Product Segment - Injection Molding

Machines, Blow Molding Machines, Extrusion Machines,

Thermoforming Machines, and Other Plastics Processing

Machines Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2006 through 2012 (includes

corresponding Graph/Chart) III-105

 

Table 96: Rest of Europe 15-Year Perspective for Plastics

Processing Machinery by Product Segment - Percentage

Breakdown of Dollar Sales for Injection Molding Machines,

Blow Molding Machines, Extrusion Machines, Thermoforming

Machines, and Other Plastics Processing Machines Markets for

Years 2006, 2014, and 2020 (includes corresponding

Graph/Chart) III-106

 

5. ASIA-PACIFIC III-107

Market Analysis III-107

Table 97: Asia-Pacific Recent Past, Current & Future

Analysis for Plastics Processing Machinery by Geographic

Region - China, India and Rest of Asia-Pacific Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2013 through 2020 (includes corresponding

Graph/Chart) III-108

 

Table 98: Asia-Pacific Historic Review for Plastics

Processing Machinery by Geographic Region - China, India and

Rest of Asia-Pacific Markets Independently Analyzed with

Annual Sales Figures in US$ Million for Years 2006 through

2012 (includes corresponding Graph/Chart) III-109

 

Table 99: Asia-Pacific 15-Year Perspective for Plastics

Processing Machinery by Geographic Region - Percentage

Breakdown of Dollar Sales for China, India and Rest of

Asia-Pacific Markets for Years 2006, 2014, and 2020

(includes corresponding Graph/Chart) III-110

 

Table 100: Asia-Pacific Recent Past, Current & Future

Analysis for Plastics Processing Machinery by Product

Segment - Injection Molding Machines, Blow Molding Machines,

Extrusion Machines, Thermoforming Machines, and Other

Plastics Processing Machines Markets Independently Analyzed

with Annual Sales Figures in US$ Million for Years 2013

through 2020 (includes corresponding Graph/Chart) III-111

 

Table 101: Asia-Pacific Historic Review f

 

 

To order this report: Global Plastics Processing Machinery Market

http://www.reportlinker.com/p092538/Global-Plastics-Processing-Machinery-Market.html

__________________________

Contact Clare: clare@reportlinker.com
US:(339) 368 6001
Intl:+1 339 368 6001

 

 

©2012 PR Newswire. All Rights Reserved.

Powered by WorldNow

10 Orms Street Providence, R.I. 02904
401-453-8000

All content © Copyright 2000 - 2014 WorldNow and WLNE.
All Rights Reserved.

For more information on this site, please read our Privacy Policy and Terms of Service.